WATER & PLUMBING

Tank capacity & fill time.

Calculate internal tank capacity and ideal fill time for a rectangular tank or an upright cylinder. Read full capacity separately from your target fill level.

Input guide

Use rectangular for a box-shaped tank or vertical cylinder for an upright round tank with flat ends. Horizontal cylinders need a different model.

Rectangle: V = length × width × height; vertical cylinder: V = π × diameter² × height ÷ 4; fill time = target volume ÷ flow

Explore unit converters →
TANK CAPACITY & FILL TIME

Need help? Select ? beside an input.

?

Use rectangular for a box-shaped tank or vertical cylinder for an upright round tank with flat ends. Horizontal cylinders need a different model.

?

Measure internal length. All tank dimensions share the selected dimension unit.

?

Use the clear inside width. Room dimensions use the same unit for length, width and height.

?

Internal height of the tank, needed for both shapes.

?

Target liquid level from 0% (empty) to 100% (full). For these shapes, this is also the percentage of full volume.

?

Capacity only needs no flow rate. Include fill time uses constant inflow from an empty tank, without outflow.

?

Volume moving each unit of time. Check the selected unit: m³/h is per hour, while L/s is per second.

Use a decimal point, for example 12.5.

Full internal tank capacity
3,000L

Volume at the chosen fill level: 3,000 L

Ideal fill time from empty: 150 min

Ideal fill time in hours: 2.5 h

The main result is full geometric capacity. The chosen fill level and time from empty appear below it.

Try an example
Formula and assumptions
Rectangle: V = length × width × height; vertical cylinder: V = π × diameter² × height ÷ 4; fill time = target volume ÷ flow

Use internal dimensions of a rectangular tank or an upright cylinder with flat ends. Horizontal cylinders and curved tank ends are not supported.

Full capacity is geometric volume; headspace, fittings and unusable bottom volume are not deducted. π is approximate.

For these constant-cross-section shapes, fill percentage applies equally to liquid height and volume.

Optional fill time starts from empty with constant inflow and no outflow. This does not select a pump or calculate pipe losses.

Inputs are converted to base units before calculation. Display uses 12 significant digits; accuracy depends on measurements and assumptions. Circular geometry uses an approximate value of π.

Practical guide
TRY THE NUMBERS

Practical examples

Worked example

A 2 × 1 × 1.5 m internal rectangular tank holds 3 m³, or 3000 L. At constant 20 L/min, filling from empty takes 150 minutes.

READ THE RESULT

How to read the result

  • Enter internal dimensions; wall thickness is not usable storage.
  • Full capacity is geometric volume; reserve space and unusable volume are not deducted.
  • Fill time assumes an empty tank, constant inflow and no simultaneous outflow.

Frequently asked questions

Can I calculate a horizontal cylindrical tank?

No. This tool supports upright cylinders with flat ends and rectangular tanks.

Does 50% mean half the liquid height?

Yes for the supported constant-section shapes. This does not apply to a horizontal cylinder.

UNITNEX

Calculation report

Use your browser's print destination to print or save as PDF.

Install UnitNex

Unit converters and calculators in a dedicated app window.

Choose the install icon in Chrome’s address bar or the install option in its menu. On iPhone or iPad, open UnitNex in Safari and choose Share → Add to Home Screen.

Calculations need an internet connection.