WATER & PLUMBING

Pump hydraulic power.

Estimate pump hydraulic power and required shaft power from flow, total head, density and pump efficiency. Motor electrical input requires an extra step.

Input guide & diagram
Q: flowHTotal head

Enter total dynamic head and pump efficiency. Density must match the fluid conditions.

Explore unit converters →
PUMP HYDRAULIC POWER

Need help? Select ? beside an input.

?

Volume moving each unit of time. Check the selected unit: m³/h is per hour, while L/s is per second.

?

Total head includes height lift and pressure/friction losses, expressed as an equivalent liquid height. It is not the horizontal pipe length.

?

Water is approximately 1000 kg/m³ under typical conditions. Other fluids or temperatures may need a different value.

?

Enter pump efficiency as a decimal: 0.75 means 75%. Use the pump data at the intended flow. This is not motor efficiency.

Use a decimal point, for example 12.5.

Required pump shaft power
2.61510666667kW

Hydraulic power: 1,961.33 W

Main result: Required pump shaft power

Shaft power is the pump mechanical input, not motor electrical consumption. Motor efficiency and selection margin are separate.

Try an example
Formula and assumptions
Hydraulic power = ρgQH; shaft power = hydraulic power / η

Steady incompressible flow; density supplied by the user. g = 9.80665 m/s².

Head is total dynamic head, including static and friction components supplied by the user.

Efficiency is pump hydraulic-to-shaft efficiency. Motor losses are not included; no pump curve or drain sizing is inferred.

Inputs are converted to base units before calculation. Display uses 12 significant digits; accuracy depends on measurements and assumptions.

Practical guide
TRY THE NUMBERS

Practical examples

Worked example

For 10 L/s, total head 20 m, density 1000 kg/m³ and pump efficiency 0.75, hydraulic power is 1.96133 kW. Required shaft power is about 2.615 kW.

READ THE RESULT

How to read the result

  • The large result is required shaft power. The smaller hydraulic value is power delivered to the liquid.
  • Total head includes the required lift, pressure difference and flow losses. It is not simply pipe length.
  • Confirm the operating point on the manufacturer pump curve. Electrical input also includes motor/drive losses not calculated here.

Frequently asked questions

How do I enter 75% efficiency?

Enter 0.75. A value of 1 is an ideal 100% case, not a typical pump rating.

Is the result a motor size recommendation?

No. Motor selection must account for the pump curve and operating range. To estimate electrical input, divide shaft power by motor/drive efficiency when known.

UNITNEX

Calculation report

Use your browser's print destination to print or save as PDF.

Install UnitNex

Unit converters and calculators in a dedicated app window.

Choose the install icon in Chrome’s address bar or the install option in its menu. On iPhone or iPad, open UnitNex in Safari and choose Share → Add to Home Screen.

Calculations need an internet connection.