ELECTRICAL

Ohm's law.

Find voltage, current or resistance for a DC resistive circuit using two known values. Understand the result before applying it to real equipment.

Input guide & diagram
V · I · RUse DC or RMS values as specified below

W, VA and var are separate quantities. Use the circuit assumptions below.

Explore unit converters →
OHM'S LAW

Need help? Select ? beside an input.

?

Use the supply voltage from the equipment or circuit. For three-phase calculations enter line-to-line voltage, not phase-to-neutral voltage.

?

Use operating current from the equipment label or a measurement. A is amperes, not power in watts.

?

Resistance is measured in ohms (Ω). This tool uses a simple DC resistive circuit.

Use a decimal point, for example 12.5.

Current
5A

This result applies to a simple DC resistive circuit.

Try an example
Formula and assumptions
V = I × R; I = V / R; R = V / I

Positive magnitudes in a DC resistive circuit.

AC impedance, reactance, cable sizing and electrical protection require separate models.

Inputs are converted to base units before calculation. Display uses 12 significant digits; accuracy depends on measurements and assumptions.

Practical guide
TRY THE NUMBERS

Practical examples

Worked example

For voltage 230 V and resistance 46 Ω, current is 230 ÷ 46 = 5 A. This is a mathematical resistor example, not a mains installation instruction.

READ THE RESULT

How to read the result

  • Choose which value to solve; enter the other two known values.
  • Use Ω, kΩ or MΩ consistently with your resistance reading.
  • The model does not represent an AC motor, reactive load or a resistor that changes with temperature.

Frequently asked questions

Does this work for every AC load?

No. AC impedance and phase relationships may be needed instead of resistance alone.

Why is zero resistance rejected when finding current?

The formula divides voltage by resistance; zero does not produce a finite result in this model.

UNITNEX

Calculation report

Use your browser's print destination to print or save as PDF.

Install UnitNex

Unit converters and calculators in a dedicated app window.

Choose the install icon in Chrome’s address bar or the install option in its menu. On iPhone or iPad, open UnitNex in Safari and choose Share → Add to Home Screen.

Calculations need an internet connection.