Practical examples
Worked example
A single-phase load at 230 V, 10 A and power factor 0.9 uses 230 × 10 × 0.9 = 2.07 kW. At a constant 2.07 kW for 2 hours, energy is 4.14 kWh.
Calculate active electrical power from voltage and current for DC, single-phase AC or balanced three-phase AC. Distinguish input power from motor output.
W, VA and var are separate quantities. Use the circuit assumptions below.
AC voltage and current are RMS. For balanced three-phase, enter line-to-line voltage and line current.
Power factor is total active/apparent power ratio. This estimates active input power, not motor shaft output.
Does not select cable, breaker or earthing.
Inputs are converted to base units before calculation. Display uses 12 significant digits; accuracy depends on measurements and assumptions.
A single-phase load at 230 V, 10 A and power factor 0.9 uses 230 × 10 × 0.9 = 2.07 kW. At a constant 2.07 kW for 2 hours, energy is 4.14 kWh.
For AC, voltage × current gives apparent power in VA for single-phase. Multiplying by total power factor gives active power in W.
Select three-phase and enter the actual line-to-line voltage, such as 400 V. Entering 230 V would describe a different voltage basis.