HVAC / VENTILATION

Duct size.

Estimate internal round duct diameter or rectangular height from airflow and target velocity. Compare the theoretical result with available duct sizes.

Input guide & diagram
Inside dimensions: diameter for a round duct, width and height for a rectangular duct diameterwidthheight

Use clear inside dimensions and average velocity. Nominal DN/NPS is not inside diameter.

Explore unit converters →
DUCT SIZE

Need help? Select ? beside an input.

?

Volume moving each unit of time. Check the selected unit: m³/h is per hour, while L/s is per second.

?

Use average speed across the full pipe or duct, not a peak reading at one point. For duct sizing this is your chosen target speed.

?

Use the clear inside width. Room dimensions use the same unit for length, width and height.

Use a decimal point, for example 12.5.

Required inside duct dimension
356.824823231mm

Calculated dimension: Inside diameter

Cross-sectional area: 0.1 m²

This is a calculated inside dimension. Choose an available duct size and check pressure loss separately.

Try an example
Formula and assumptions
A = Q ÷ v; diameter = √(4A/π); height = A ÷ width

Steady volumetric airflow and average velocity at the same gas conditions.

Use internal duct dimensions. Calculated duct sizes are theoretical, not rounded to manufactured sizes.

This does not calculate pressure loss, fan selection, mixing efficiency or ventilation compliance.

Inputs are converted to base units before calculation. Display uses 12 significant digits; accuracy depends on measurements and assumptions. Circular geometry uses an approximate value of π.

Practical guide
TRY THE NUMBERS

Practical examples

Worked example

At 1800 m³/h and 5 m/s, area is 0.1 m². A round duct needs an internal diameter about 356.825 mm; a 400 mm wide rectangle needs height 250 mm.

READ THE RESULT

How to read the result

  • Round mode returns inside diameter; rectangular mode returns height for your entered width.
  • Choose a manufactured size and recalculate the actual velocity.
  • This is a geometric estimate; fittings, friction and fan selection are separate checks.

Frequently asked questions

Should I order a 356.825 mm duct?

No. Use available dimensions and verify the resulting area and velocity.

Does a larger duct reduce required airflow?

No. It changes velocity for the same flow; the required flow comes from the application.

UNITNEX

Calculation report

Use your browser's print destination to print or save as PDF.

Install UnitNex

Unit converters and calculators in a dedicated app window.

Choose the install icon in Chrome’s address bar or the install option in its menu. On iPhone or iPad, open UnitNex in Safari and choose Share → Add to Home Screen.

Calculations need an internet connection.