HVAC / VENTILATION

Air changes per hour.

Calculate nominal air changes per hour from airflow and room volume. Understand what ACH describes and why it is not a complete ventilation assessment.

Input guide & diagram
Room length, width and heightlengthwidthheight

Room volume = length × width × height.

Explore unit converters →
AIR CHANGES PER HOUR

Need help? Select ? beside an input.

?

Volume moving each unit of time. Check the selected unit: m³/h is per hour, while L/s is per second.

?

Room volume is length × width × height. Choose Room dimensions if you do not know the volume.

?

Use the clear inside width. Room dimensions use the same unit for length, width and height.

?

Use the clear inside height. Room dimensions use the same unit for length, width and height.

Use a decimal point, for example 12.5.

Air changes per hour
6h⁻¹

Room volume: 100 m³

ACH is a theoretical air-change rate. It does not show how well fresh air mixes or establish a ventilation requirement.

Try an example
Formula and assumptions
ACH = Q × 3600 ÷ room volume

Steady volumetric airflow and average velocity at the same gas conditions.

Use internal duct dimensions. Calculated duct sizes are theoretical, not rounded to manufactured sizes.

This does not calculate pressure loss, fan selection, mixing efficiency or ventilation compliance.

Inputs are converted to base units before calculation. Display uses 12 significant digits; accuracy depends on measurements and assumptions.

Practical guide
TRY THE NUMBERS

Practical examples

Worked example

A 100 m³ room with airflow 600 m³/h has 600 / 100 = 6 air changes per hour. This is a nominal flow-to-volume ratio, not six complete replacements of all room air.

READ THE RESULT

How to read the result

  • Use room internal volume. For a rectangular room, multiply inside length × width × height.
  • Keep volume and flow on compatible units; the tool converts flow to a per-hour basis.
  • ACH alone does not establish outdoor-air delivery, mixing effectiveness or compliance with ventilation requirements.

Frequently asked questions

May I use fan nameplate airflow?

It is a starting estimate. Actual airflow can differ after ducts, filters and installation losses; use measured operating airflow when available.

Does 6 ACH mean the room meets a ventilation standard?

No. Requirements depend on room use, occupants, contaminants and the applicable design method. This tool calculates the ratio only.

UNITNEX

Calculation report

Use your browser's print destination to print or save as PDF.

Install UnitNex

Unit converters and calculators in a dedicated app window.

Choose the install icon in Chrome’s address bar or the install option in its menu. On iPhone or iPad, open UnitNex in Safari and choose Share → Add to Home Screen.

Calculations need an internet connection.