CAMERAS & STORAGE

Data transfer time.

Estimate transfer time from file size, connection speed and the share of that speed available for file data.

Input guide

Connection or copy speed. Mbit/s measures bits, while MB/s measures bytes: 1 MB/s = 8 Mbit/s.

Time = data size (bits) ÷ [transfer rate (bits/s) × throughput fraction]

Explore unit converters →
DATA TRANSFER TIME

Need help? Select ? beside an input.

?

Total file data to transfer. GB uses 1000-based units; GiB uses 1024-based units. Choose the unit shown by your file manager.

?

Connection or copy speed. Mbit/s measures bits, while MB/s measures bytes: 1 MB/s = 8 Mbit/s.

?

Share of the entered speed available for file data: 90 means 90%. Use 100% when entering measured file-data speed. Must be greater than 0 and at most 100.

Use a decimal point, for example 12.5.

Estimated transfer time
14.8148148148min

Ideal time at 100% throughput: 13.3333333333 min

Effective file-data rate: 90 Mbit/s

Estimated time in seconds: 888.888888889 s

This is an estimate at a constant effective rate. 1 MB/s is 8 Mbit/s; GB and GiB also differ.

Try an example
Formula and assumptions
Time = data size (bits) ÷ [transfer rate (bits/s) × throughput fraction]

One byte is eight bits. MB/GB/TB use decimal prefixes; MiB/GiB/TiB use binary prefixes. MB/s and Mbit/s are different rates.

Throughput percentage is the share of the entered rate available for file data. Use 100% if the rate already measures actual file-data throughput.

The average rate is constant. Startup delay, congestion, compression and disk speed can change actual time; this is an estimate.

Inputs are converted to base units before calculation. Display uses 12 significant digits; accuracy depends on measurements and assumptions.

Practical guide
TRY THE NUMBERS

Practical examples

Worked example

A 10 GB file is 80000 Mbit. At 100 Mbit/s with 90% usable throughput, time is about 888.889 seconds, or 14.815 minutes.

READ THE RESULT

How to read the result

  • MB/s is megabytes per second; Mbit/s is megabits per second. One byte is eight bits.
  • GB is decimal; GiB is binary. Select the unit reported by your system.
  • If the speed is measured file-data throughput, use 100% to avoid deducting overhead twice.

Frequently asked questions

Why is the actual transfer slower?

Wi-Fi conditions, congestion, server speed and storage can reduce the average transfer rate.

Is a 1 Gbit/s link the same as 1 GB/s?

No. At 100% usable throughput, 1 Gbit/s corresponds to 0.125 GB/s.

UNITNEX

Calculation report

Use your browser's print destination to print or save as PDF.

Install UnitNex

Unit converters and calculators in a dedicated app window.

Choose the install icon in Chrome’s address bar or the install option in its menu. On iPhone or iPad, open UnitNex in Safari and choose Share → Add to Home Screen.

Calculations need an internet connection.