CAMERAS & STORAGE

Camera recording storage.

Estimate recording storage from camera count, average bitrate and retention days. Include recording schedule, capacity margin, free reserve and RAID.

Input guide & diagram
Bitrate × time → disk capacity

Enter measured average bitrate, including audio if recorded. Codec and resolution do not guarantee a fixed bitrate.

Explore unit converters →
CAMERA RECORDING STORAGE

Need help? Select ? beside an input.

?

Average recording data rate per camera in Mbit/s. Read the camera/NVR setting or measure actual recordings, including audio. Resolution alone cannot determine bitrate.

?

Hours within each day when recording is allowed. 24 means the entire day; this is separate from the fraction actually recorded.

?

100% means continuous recording during the daily window. For motion recording, enter the estimated recorded fraction; actual activity can change retention.

?

Extra capacity added to the estimated video payload. 20% adds one fifth for uncertainty and overhead; it is separate from free-space reserve.

?

The share of usable disk space kept free. 10% reserve leaves 90% available for recordings and margin.

?

RAID 1 mirrors two disks. RAID 5 needs at least three disks and uses one disk-equivalent for parity; RAID 6 needs at least four and uses two. Check recorder support. RAID is not a backup.

?

All disks are assumed equal capacity, with no spare disk. None adds their capacities together; verify that the recorder can use them that way.

Use a decimal point, for example 12.5. Camera and disk counts must be whole numbers.

Required total physical disk capacity
13.824TB

Video payload only: 10.368 TB

Required usable array capacity (including free reserve): 13.824 TB

Minimum nominal capacity per disk (round up when purchasing): 6.912 TB

Configured disk count: 2

Total capacity includes the entered margins and RAID. Round the per-disk minimum up to an available size.

Try an example
Formula and assumptions
Video bits = cameras × bitrate × seconds × recording fraction; capacity includes margin, free reserve and RAID

Enter average recorded bitrate per camera, including audio if recorded. Cameras are assumed identical. Resolution, FPS, codec and scene motion affect bitrate; measure or use the vendor estimate.

Hours is the daily recording window; recording percentage is the fraction recorded within that window. Event-triggered recording is an estimate, not a guaranteed retention period.

Margin is added to payload; free-space reserve is a fraction of usable array capacity. TB/GB are decimal; TiB/GiB are binary. All disks are equal capacity, with no hot spare.

RAID 1 is a two-disk mirror; RAID 5 loses one disk to parity; RAID 6 loses two. None assumes pooled/summed disks. Check recorder support, formatting/system overhead, sustained write limits and actual footage. RAID is not a backup.

Inputs are converted to base units before calculation. Display uses 12 significant digits; accuracy depends on measurements and assumptions.

Practical guide
TRY THE NUMBERS

Practical examples

Worked example

8 cameras at 4 Mbit/s, 30 days, 24 hours/day and 100% recording need 10.368 TB of video. With 20% extra and 10% free reserve: 13.824 TB total without RAID. For 2 disks, each needs at least 6.912 TB nominal capacity before rounding up.

READ THE RESULT

How to read the result

  • Read three values separately: video data, usable array capacity and total physical disk capacity. RAID changes how physical disks provide usable space.
  • Enter the recorded stream average bitrate in Mbit/s, including audio if present. Resolution alone does not determine bitrate.
  • Round up the minimum per-disk value to a supported capacity and check recorder limits, formatting overhead and sustained write performance.

Frequently asked questions

Why do 20% extra and 10% reserve not simply mean 30% extra?

Extra capacity multiplies video size by 1.20. Keeping 10% of usable capacity free then divides by 0.90: 10.368 × 1.20 / 0.90 = 13.824 TB.

Can I enter a percentage for motion recording?

Yes, as an estimated share of the selected daily recording window. A 50% estimate is not a guaranteed retention period.

Why does my computer show less space than the disk label?

The disk label normally uses decimal TB; an operating system may show binary TiB and reserve space for formatting. Select the matching output unit. RAID is not a backup.

UNITNEX

Calculation report

Use your browser's print destination to print or save as PDF.

Install UnitNex

Unit converters and calculators in a dedicated app window.

Choose the install icon in Chrome’s address bar or the install option in its menu. On iPhone or iPad, open UnitNex in Safari and choose Share → Add to Home Screen.

Calculations need an internet connection.